ZORTRAX INVENTURE
K2 PLus Combo Epic Leap of Color & Size
Creality K2 Plus packs a substantial 350 x 350 x 350 mm build size and this plus format enables larger objects or larger batches. It get easier and satisfying your ever-expanding 3d printing aspirations.
Technology
Material
Build Size
Extrusion
Nozzle
Connectivity
Safety
: LPD+ / FDM
: 1.75mm Filament
: 135x135x120mm
: Dual Nozzle
: 0.4 mm
: SD Card
: Dock Lock System
Water-Soluble Support Material
In dual-extrusion mode, Zortrax Inventure prints supports out of Z-SUPPORT Premium, a BVOH water-soluble filament. They can be removed in Zortrax DSS Station wich keeps the water at optimal temperature and circulates in around the model to achieve high dissolution rate. Supports printed on the Inventure in the single-extrusion mode are made of the model material and have to be removed mechanically
Step 1 - Put into water
Take the model off the build tray and submerge it in water inside the Zortrax DSS Station.
Step 2 - Rinse
Take the model out of the Zortrax DSS Station. Sometimes it's necessary to remove remnants of support with a brush included in the kit.
Step 3 - Dry
Carefully dry the model once the support dissolution is done. That's all. The support structures are gone.