ThermaX™ HTS [High Temperature  Break-away Support]

ThermaX™ HTS [High Temperature Support] break away support is ideal for printing high-temperature polymers including PSU, PES, PPSU, PPS, Ultem™ PEI, PEKK, and PEEK. This support adheres well to these advanced materials and then is broken away after printing to allow for complex geometry without damaging your part

Our break away high-temp support filament is ideal for use in dual extruder 3D printers designed to print high-temp materials.

HTS is the premium support for our high-temp products, unlike most support filaments, which are not designed to withstand the heat required to print the top-end of performance materials.

Works ideal with the following ThermaX™ materials:

• PEKK [PolyEtherKetoneKetone]

• PEEK [PolyEtherEtherKetone]

• PEI made using ULTEM™

• PPSU [Polyphenyl Sulfone]

• PSU [Polysulfone]

• PPS [Polyphenylene Sulfide]

Support Removal:

• This is break-away support and does not dissolve.

• High-Temp support is best removed while printed part is still warm.

• If the finished printed part cools completely and the support removal gets too difficult, you can re-warm the part in the printer chamber or an oven not exceeding the Tg of the model material you are printing with.